AEG OKO Lavamat Turbo 16800 – Noisy

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › AEG OKO Lavamat Turbo 16800 – Noisy

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 11, 2006 at 6:11 pm #19088
    Colatron
    Participant

    1st of all many thanks to Martin for providing me with the solution to my earlier problem with the machine

    The problem now is that it makes one heck of a noise – used to be really quiet

    Any ideas?

    Cheers

    July 11, 2006 at 8:44 pm #181675
    Penguin45
    Participant

    Re: AEG OKO Lavamat Turbo 16800 – Noisy

    Gets louder on spin? Almost certainly drum bearings. Open the door, put hand up at 12 o’clock and try to lift. If there is any movement of the lip of the drum in relation to the inner edge of the door seal, the bearings are on their way out. Often, if you turn the drum by hand, you can feel a slight roughness.

    If the above is true, this is at least an hour and a half’s work for a professional as it involves (quite literally!) the demolition of the machine to its component parts.

    I would seriously consider professional help……. Click the link below to see if there is a UKW engineer in your area.

    Power off if you are going to investigate further.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.