Brandt COA380AU on but not working

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Brandt COA380AU on but not working

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 31, 2006 at 2:30 pm #19567
    _Dilz_
    Participant

    I have a Brandt COA380AU fridge/freezer (less than 3 years old!!). There is power going to the unit (green light on, plus light comes on in the fridge), but neither the fridge or the freezer is working. There is also no sound coming from the compressor at any time.

    One other thing to note, is that every now and again in the last few months, a small puddle of water has appeared on the floor outside the unit on the right hand(hinge side). Don’t know if this has anything to do with it. Up until it stopped working, there were no performance issues and it kept a steady temperature.

    Has anyone got any ideas as to what the problem might be?

    Thanks
    Nick

    July 31, 2006 at 4:04 pm #183677
    Dave_Conway
    Participant

    Re: Brandt COA380AU on but not working

    _Dilz_ wrote:Has anyone got any ideas as to what the problem might be?

    It sounds like the PCB I’m afraid, either that or the compressor has failed but the former is more likely 🙁

    The PCB is roughly £50-£60 so I’d ask an engineer to check to be certain unless you have the means to test it (with the power off). The repairs@ link below should provide one 🙂

    Dave.

    July 31, 2006 at 5:01 pm #183678
    _Dilz_
    Participant

    Re: Brandt COA380AU on but not working

    Thanks for the quick reply. I actually got the model wrong. It is a Brandt CFA361XU. Would that make a differnece to the diagnosis?

    What do you need to test the PCB and where can it be found?

    Nick

    July 31, 2006 at 10:55 pm #183679
    Dave_Conway
    Participant

    Re: Brandt COA380AU on but not working

    _Dilz_ wrote:I actually got the model wrong. It is a Brandt CFA361XU. Would that make a differnece to the diagnosis?

    Nope, very much the same type of unit with a different PCB but roughly the same price 🙂

    _Dilz_ wrote:What do you need to test the PCB and where can it be found?

    If you need to ask that then it’s engineer time in all honesty, I’m afraid we can’t go into specifics for legal and safety reasons 😉

    Dave.

    August 1, 2006 at 7:54 am #183680
    _Dilz_
    Participant

    Re: Brandt COA380AU on but not working

    I’ve got the old PCB out, do you know where I can get a new PCB from?

    Nick

    August 1, 2006 at 8:48 am #183681
    Dave_Conway
    Participant

    Re: Brandt COA380AU on but not working

    I can get it for you no problem, an email to spares@ukwhitegoods.co.uk with the model number please and I’ll get prices etc 🙂

    Dave.

    August 3, 2006 at 6:38 pm #183682
    _Dilz_
    Participant

    Re: Brandt COA380AU on but not working

    Just a quickie to say thanks for all your help. Got the PCB today, fitted it and fridge works perfectly again.

    Thanks again

    Nick

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.