- This topic has 6 replies, 3 voices, and was last updated 19 years, 8 months ago by
.
-
Posts
-
Hi there,
Maybe someone can help identify what fault code this dishwasher is showing please?
It has four LEDs in a row, which pertain to the part of the cycle the machine is on. Before finishing the entire run, however, it’s reverting to constant flashing of the first two LEDs in unison. It seems like the contents have been cleaned, although I don’t think it had finished completely.
It seems to only have this problem when two certain programs are used: the first program on the dial, which is a 70 degree extended wash for stubbornly dirty dishes, and the second program which is a 50 degree “everyday” cycle.
I’ve Googled for it, but the only information referred to only one LED flashing at a time, and was for an older model.
Thank you,
JamesRe: Ariston LSE615 – Fault code: two LEDs blinking
That model number isn’t correct I’m afraid unless it’s a non-UK model ?
Normally the first 2 leds flashing is a drain fault though 😉
Dave.
Re: Ariston LSE615 – Fault code: two LEDs blinking
Are you sure the model number is LSE615 as I can’t see a listing for that model? However many of the later ariston D/w’s with such an error code indicate that the heater is not working 🙁
Re: Ariston LSE615 – Fault code: two LEDs blinking
:waving: Drain fault or heater fault?….That narrows it down a bit at least 🙂
:waving:
Re: Ariston LSE615 – Fault code: two LEDs blinking
Thanks for the replies. I’m sorry, I should have said that it’s a model purchased in Spain.
If it helps by giving an idea of the type of machine, as there’s perhaps a UK equivalent model, I can say that it’s around 4 years old. Starting from the left side of the top panel, it has on/off button, half-load button, 4 LEDs and then a rotary dial for selecting between roughly 7 programs.
- You must be logged in to reply to this topic.