- This topic has 4 replies, 3 voices, and was last updated 19 years, 8 months ago by
.
-
Posts
-
Hi, I have an indesit wg1432 washing machine that makes a terrible noise whilst spinning. I think this is a bearing problem and I would like to fix it. How could I take the bearings out, and what would be the cost of the bearings ? Thankyou any help you could give would be appreciated..
Re: indesit wg1432 bearing noise
sootyfishing wrote: How could I take the bearings out, and what would be the cost of the bearings ? .
The bearing spider has to be removed, the old bearings removed and then reassembled. 2 bearings and water seal (Part No’s C0082696, C0044765 and C0013563) will set you back around £25 – £30. (Available via spares@ukwhitegoods.co.uk )
Expert help from a local engineer can be sort by clicking the link below. 🙂
Re: indesit wg1432 bearing noise
sorry about the delay, thankyou for your advice. parts are on order so i hope to fix it soon. is it easy enough to take the bearing spider out??
Re: indesit wg1432 bearing noise
You can remove the drum support easily enough – 8 Torx bolts. The real problem is getting the pulley off – the bolt can be a real swine to get off.
Regards,
Penguin45.
- You must be logged in to reply to this topic.