- This topic has 4 replies, 4 voices, and was last updated 19 years, 7 months ago by
.
-
Posts
-
It fills via the prewash valve continually as soon as power is switched on. The red light flashes rapidly, too fast to count. The drum rotates both direction whilst filling. When the water level reaches half way up the drum the suds pump kicks in while it continues to fill. Customer says it does actually finish its programme!
I disconected the heaters and the motor, chcked the pressure stat and pipe. Inspected the PCB. All seems fine.
Any idea?
AnyRe: indesit WD12
i think the fault is its an indesit
but that aside does it flash too fast to count all the way through the cycle? and does itactually heat etc
i would say p switch or most likely mod fault
but aint come across it b4Re: indesit WD12
99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain a control module failure. Have seen this fault several times.
Kevin, I have moved this into the Trade Tech forum, best to keep this stuff away from the Public forums. 😉
Re: indesit WD12
Classic fault on these boards. Fit a new board – all will be ok. We’ve got them in stock inc eprom £34.90+vat Tony 0115 9652118
- You must be logged in to reply to this topic.