zanussi door wont lock

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › zanussi door wont lock

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • August 15, 2006 at 11:11 pm #19981
    nigelr
    Participant

    i have a zanussi fs1555w that wont run, the interlock is new but the lock light still not on, the interlock fires three times then error code for door open.
    hellp

    August 15, 2006 at 11:15 pm #185286
    gegsy
    Participant

    Re: zanussi door wont lock

    Possible spring tension of striker in door the culprit.

    Greg

    August 15, 2006 at 11:21 pm #185287
    Penguin45
    Participant

    Re: zanussi door wont lock

    Unlikely, Gegsy – board rather more likely candidate, especially if the original lock actually failed.

    Penguin45.

    August 15, 2006 at 11:36 pm #185288
    gegsy
    Participant

    Re: zanussi door wont lock

    Yea think you right there.

    Nigel, can you post up all the numbers after the model number off the rating plate so we can assist you further?

    Greg

    August 16, 2006 at 10:08 pm #185289
    nigelr
    Participant

    Re: zanussi door wont lock

    thanks for your interest.
    Mod fs1555w, Typep6848646, prod No 914791191/00

    August 16, 2006 at 10:50 pm #185290
    gegsy
    Participant

    Re: zanussi door wont lock

    If its the PCB as P45 suggested then its p/no DST973914791191005
    around the £160 mark.

    Greg

    August 16, 2006 at 11:26 pm #185291
    Penguin45
    Participant

    Re: zanussi door wont lock

    Nasty – does it have to be programmed as well? If so, it’s engineer time……..

    Penguin45.

    August 16, 2006 at 11:30 pm #185292
    gegsy
    Participant

    Re: zanussi door wont lock

    Says pre-programmed, still fiddly to fit though.
    Engineer may be best course to take me thinks.

    Greg

    August 19, 2006 at 5:15 pm #185293
    nigelr
    Participant

    Re: zanussi door wont lock

    Thanks alot for the input guys.
    it was the board, broken track fixed it with a conductive pen,you made my misses very happy.
    Nigel

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.