Bosch WFT2800GB/13

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WFT2800GB/13

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 17, 2006 at 1:23 pm #20029
    rocker
    Participant

    have no motor action , tested motor checks out ok…does this appear to be a pcb board fault as the price is around £200. can any one advise me.

    Cheers john.

    August 17, 2006 at 1:40 pm #185497
    Martin
    Participant

    Re: Bosch WFT2800GB/13

    rocker wrote:have no motor action , tested motor checks out ok…

    Are you really sure the motor is OK? Have you checked out those brushes and stuff? The module is built like a brick bus shelter and on the very rare occasions they go AWOL it is the motor that causes it anyway!

    Close visual on the module the only option if the motor does check out. The machine is 6 -8 yrs old now so the brushes should be pretty well shot I would have thought?

    August 17, 2006 at 10:07 pm #185498
    gegsy
    Participant

    Re: Bosch WFT2800GB/13

    Hi
    The motor will split in half to reveal the brush module unit.
    BSH p/no 496876 £31 +VAT if you should require it.

    Greg

    August 17, 2006 at 10:14 pm #185499
    gegsy
    Participant

    Re: Bosch WFT2800GB/13

    ……..or you could order from the UKW shop http://tinyurl.com/q2w7x
    not geared really for trade but in this instance a significant price difference.
    You will need to do a bit of soldering thats the only bug bear 😉

    Greg

    August 18, 2006 at 12:08 pm #185500
    rocker
    Participant

    Re: Bosch WFT2800GB/13

    Thanks to both Martin & Greg for your advice on this machine, it appears the customer never gave me the correct infomation.
    It now turns out the org fault was the machine load was unbalanced and it walked accross the floor.
    motor is ok
    Thanks again. John

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.