Indesit WIDL126 Washer Dryer Error Code – LED 3+4 flashing

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WIDL126 Washer Dryer Error Code – LED 3+4 flashing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 21, 2006 at 10:24 pm #20155
    lees19981
    Participant

    Fault occured when the machine appeared to fill itself completely with foam during the wash cycle and then turned itself off, on powering on at mains it now has the door lock led flashing quickly along with leds 3 and 4 both flashing together.

    Can anyone advise what may be the fault and whether this will be a costly repair?

    Any help would be very much appreciated

    Lee

    August 21, 2006 at 10:34 pm #186041
    Dave_Conway
    Participant

    Re: Indesit WIDL126 Washer Dryer Error Code – LED 3+4 flashi

    Lamps 3+4 indicate a temperature control problem but why the over-foaming in the first place ?

    Did someone put the wrong type of detergent in the machine ?

    Dave.

    August 21, 2006 at 10:38 pm #186042
    lees19981
    Participant

    Re: Indesit WIDL126 Washer Dryer Error Code – LED 3+4 flashi

    Same detergent as usual, can only assume too much was used perhaps???? Would a temperature ontrol problem require a call out or could it be fixed by myself or by allowing the machine to cool down overnight?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.