Indesit W123UK BG

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit W123UK BG

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • August 24, 2006 at 4:09 pm #20261
    Alanj
    Participant

    Hi Guys,
    went to this w/m today, keeps filling with water after p/sw clicks off, also keeps fill when set to drain. I opened up p/sw to look for sign of burnt contacts but it was ok. Could it be the module located in the bottom back of machine. Part number for p/sw and module would be helpful if this is the fault.

    Alan

    August 24, 2006 at 4:57 pm #186398
    timdowning
    Participant

    Re: Indesit W123UK BG

    Had this fault on other makes and it was one of the triacs on the board.

    August 24, 2006 at 5:41 pm #186399
    iadom
    Moderator

    Re: Indesit W123UK BG

    Very common module fault. Send it to Tony at EMW for repair, if you order a new one you will need to order an eeprom as well. Couple of different pressure switches, need serial number to ID, has it got the metal or plastic outer drum?

    August 24, 2006 at 10:31 pm #186400
    Alanj
    Participant

    Re: Indesit W123UK BG

    iadom ,
    the machine has metal outer drum Ser No. 304102090.

    Alan

    August 24, 2006 at 10:40 pm #186401
    iadom
    Moderator

    Re: Indesit W123UK BG

    Pressure switch is a C00088393. Module is C0093157, Eeprom is C00089846.

    would still advise sending the module to EMW, they will turn it round almost a soon as you can order a new one with a good saving on cost of new module & eeprom combined.

    August 25, 2006 at 4:06 pm #186402
    Alanj
    Participant

    Re: Indesit W123UK BG

    I will send it to EMW for repair but I will replace the p/sw as well.

    Alan

    Thanks iadom

    September 8, 2006 at 10:31 am #186403
    Alanj
    Participant

    Re: Indesit W123UK BG

    Hi Guys,

    Got another one of these, this time plastic outer drum and ser no 403101240.
    Have you got the p/switch part no. for this one.

    Alanj

    September 8, 2006 at 11:02 am #186404
    Dave_Conway
    Participant

    Re: Indesit W123UK BG

    In theory, it should be C00094717 🙂

    Dave.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.