Replace bearing on aqualux 1000

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Replace bearing on aqualux 1000

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 26, 2006 at 11:59 am #20312
    hassy
    Participant

    electrolux Aquyalux 1000. Is it possible for a DIY mid novice to repair the bearing on this machine.
    Thanks Hassy

    August 26, 2006 at 3:18 pm #186606
    Penguin45
    Participant

    Re: Replace bearing on aqualux 1000

    Various types of drum, so tell us the model number, please.

    Regards,
    Penguin45.

    August 26, 2006 at 5:37 pm #186607
    hassy
    Participant

    Re: Replace bearing on aqualux 1000

    EW 1000 I
    Electrolux aqualux 1000
    Intergrated
    Does this help
    Regards
    Hassy

    August 26, 2006 at 6:07 pm #186608
    Penguin45
    Participant

    Re: Replace bearing on aqualux 1000

    Yup, nails it down nicely. This machine requires you to split the casing and remove the entire drum assembly in order to change the bearings. A complete cow of a job – most repairers will allow two hours on site to do the job; some may even uplift it as a workshop job.

    Apart from that, basic hand tools and a seriously large hammer and drift are all that’s required.

    Bearings and seals may be purchased through the spares@ukwhitegoods.co.uk facility on the site, as can the drum support , if required. Given the level of dismantling required, I would suggest that you check the condition of the drain pump and motor brushes whilst it’s all apart.

    Regards,
    Penguin45.

    August 27, 2006 at 6:45 pm #186609
    hassy
    Participant

    Re: Replace bearing on aqualux 1000

    Thanks a lot
    Panic stations!!!
    Hassy

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.