indesit w143 10 flashes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit w143 10 flashes

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • August 28, 2006 at 2:25 pm #20359
    phil59
    Participant

    hi everyone indesit w143 10 flashes changed press switch 4 times no different whats ***&!!!!* happening

    August 28, 2006 at 5:15 pm #186796
    Penguin45
    Participant

    Re: indesit w143 10 flashes

    Hi Phil,
    Pressure switch problems……
    http://www.ukwhitegoods.co.uk/modules.p … 0&start=15 – Page 2.

    Welcome aboard,
    Chris
    Leeds (Yeadon)

    August 28, 2006 at 7:03 pm #186797
    phil59
    Participant

    thanks chris much appreciated

    August 28, 2006 at 7:11 pm #186798
    phil59
    Participant

    chris ,all that tells me is its the pressure switch but ive changed it for 4 diff ones still same??

    August 28, 2006 at 7:28 pm #186799
    Penguin45
    Participant

    Re: indesit w143 10 flashes

    Great, isn’t it……….. Not really a magic bullet solution.

    What’s it actually doing? Does it get started filling at all?

    Other suspects ; Wiring, air hose and chamber, edge connector to board, bord itself 🙁 .

    Chris.

    August 28, 2006 at 11:16 pm #186800
    phil59
    Participant

    on start up usual light flash door lock activates
    then nothing for a few secs then it throws out of prog with 10 flashes and continually pumps

    August 29, 2006 at 12:33 am #186801
    Penguin45
    Participant

    Re: indesit w143 10 flashes

    Sounds like the flood protection is operating – if you’ve swapped out the p/sw (new?), so wiring or board most likely candidate.

    Chris.

    August 29, 2006 at 10:48 am #186802
    DDSDDS
    Participant

    Re: indesit w143 10 flashes

    DEFINATLY CHECK the board for damage clean it up and make sure wires all nice and tight to it

    August 29, 2006 at 8:19 pm #186803
    phil59
    Participant

    thanks guys for your help i think its the board ill change it tomozz

    August 29, 2006 at 8:29 pm #186804
    funkyboogy
    Participant

    Re: indesit w143 10 flashes

    take a spare motor with you as well…
    can cause this prob
    cheers ally

    August 29, 2006 at 10:33 pm #186805
    phil59
    Participant

    cheers ally will do thanks phil

    September 2, 2006 at 5:58 pm #186806
    phil59
    Participant

    wozzzzz the board changed now ok thanks guys phil

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.