Blomberg 1301 does not spin after intermediate rinses

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Blomberg 1301 does not spin after intermediate rinses

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 2, 2006 at 8:11 pm #20517
    BobK
    Participant

    I have a Blomberg 1301 ABB that does not spin after the intermediate rinses, however it does spin after the final rinse. My wife is adamant that it should spin after the intermediate rinses but we can find no confirmation of this in the instruction book. The machine is consistent in operating in this way and otherwise appears to be working fine. Firstly can anyone please confirm that it should spin after each intermediate rinse and if it should, what could be the problem?

    September 2, 2006 at 8:16 pm #187325
    Penguin45
    Participant

    Re: Blomberg 1301 does not spin after intermediate rinses

    http://www.ukwhitegoods.co.uk/modules.p … t=blomberg
    Is what you want.

    Regards,
    Penguin45.

    September 3, 2006 at 2:48 pm #187326
    BobK
    Participant

    Re: Blomberg 1301 does not spin after intermediate rinses

    Thanks for the prompt response. I cleaned out the bell about a year ago and it was quite blocked then, however I removed and examined it again and it was quite clean and clear. I gave it a thorough wash anyway and reinstalled it. The spin problem now seems to have disappeared and the machine now performs both the intermediate spins and the final spin sequences faultlessly. I will monitor the situation and see if this is a coincidence or whether this is an intermittent condition. Thanks once again.
    Bob K 😕

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.