Blomberg 1301 does not spin after intermediate rinses

[BobK]

I have a Blomberg 1301 ABB that does not spin after the intermediate rinses, however it does spin after the final rinse. My wife is adamant that it should spin after the intermediate rinses but we can find no confirmation of this in the instruction book. The machine is consistent in operating in this way and otherwise appears to be working fine. Firstly can anyone please confirm that it should spin after each intermediate rinse and if it should, what could be the problem?

[Penguin45]

Re: Blomberg 1301 does not spin after intermediate rinses

http://www.ukwhitegoods.co.uk/modules.p … t=blomberg
Is what you want.

Regards,
Penguin45.

[BobK]

Re: Blomberg 1301 does not spin after intermediate rinses

Thanks for the prompt response. I cleaned out the bell about a year ago and it was quite blocked then, however I removed and examined it again and it was quite clean and clear. I gave it a thorough wash anyway and reinstalled it. The spin problem now seems to have disappeared and the machine now performs both the intermediate spins and the final spin sequences faultlessly. I will monitor the situation and see if this is a coincidence or whether this is an intermittent condition. Thanks once again.
Bob K 😕

[Author]

Posts