AEG Lavamat overfill

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › AEG Lavamat overfill

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 5, 2006 at 3:45 pm #20593
    Tropicalman
    Participant

    HI! I am in the West Indies where European machines are rare. My AEG overfills (to top of door), then stops with error code E10. Any advice on what spares I could order to get it going again? Many thanks

    September 5, 2006 at 8:03 pm #187635
    Penguin45
    Participant

    Re: AEG Lavamat overfill

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=12318

    Given that the recent AEG machines are tarted up Zanussi product, we can assume that the machine is not detecting the water level. You probably don’t need parts – likely problems are the water level control chambers being clogged up, or split air hose to the level switch.

    Power off if investigating.

    Regards,
    Penguin45.

    September 7, 2006 at 9:05 pm #187636
    Tropicalman
    Participant

    Re: AEG Lavamat overfill

    Fixed it I think.The level switch has 3 stages and the 3rd was sticking. I loosened the spring tension screw on this & now it works! But I think I should order a spare level switch. Anyway I wouldn’t have even opened the top of the machine without this forum so thanks!!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.