Knob turning, not draining and not able to open the filter

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Knob turning, not draining and not able to open the filter

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 7, 2006 at 11:03 am #20655
    TEH
    Participant

    I tried to open the filter at the bottom of the machine, I turned it and lots of water came out but I can’t take it out, too hard, Is there any trick. I need to check if there is anything stock there.

    Thanks,

    September 7, 2006 at 11:07 am #187882
    TEH
    Participant

    Re: Knob turning, not draining and not able to open the filt

    Sorry I forgot model machine, Marguerita Awd 125 Advantage

    Thanks

    September 7, 2006 at 8:06 pm #187883
    Penguin45
    Participant

    Re: Knob turning, not draining and not able to open the filt

    The reason you cant turn the filter out is because something is jamming it. Drain the rest of the water by dropping the darin hose into a washing up bowl. Rocking the machine back and forward may dislodge the object, failing that the pump and hoses will have to be removed and the pump dismantled.

    Power off, if you have to go that way, failing that, click the link below for a UKW engineer in your area.

    Regards,
    Penguin45.

    September 7, 2006 at 9:14 pm #187884
    TEH
    Participant

    Re: Knob turning, not draining and not able to open the filt

    Thanks I’ll try it !!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.