W/Pool/Ikea/Smeg DWF416

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › W/Pool/Ikea/Smeg DWF416

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • September 9, 2006 at 6:55 am #20705
    goosegreen
    Participant

    When starting any prog, Will fill, and then wash for exactly 2 mins then goes dead. Have fitted new dispensor coil,and drain pump but its got me stumped. Am now thinking PCB, But have never seen this fault before.

    Regards

    Goose

    September 9, 2006 at 8:15 am #188097
    Bill
    Participant

    Re: W/Pool/Ikea/Smeg DWF416

    Goose,

    You do not say what make! if SMEG what age? check the break on right hand side also check water pressure going into break.

    Bill Ellis :scot:

    September 9, 2006 at 11:49 am #188098
    DentedPorsche
    Participant

    Re: W/Pool/Ikea/Smeg DWF416

    It’s a Whirlpool, dolphin range machine.
    Never had this sort of problem before.
    No error code?
    Have you ran the test program?
    W/pool training we were told no error code is a faulty module. (Don’t believe that’s 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} true though).
    If you leave the machine when it stops does it go through and complete the cycle (without wash pump running)?

    Brian

    September 9, 2006 at 1:51 pm #188099
    goosegreen
    Participant

    Re: W/Pool/Ikea/Smeg DWF416

    The machine is about 2 years old and the 85 No is:854585615600 but its definitely a Smeg. I know it crazy! Whirlpool branded, Made for Ikea but manufactured by Smeg 😕

    Goose

    September 10, 2006 at 8:52 am #188100
    DentedPorsche
    Participant

    Re: W/Pool/Ikea/Smeg DWF416

    Ah, my Sios disc isn’t new enough for that 12nc. Sorry.

    Brian

    September 10, 2006 at 9:06 am #188101
    goosegreen
    Participant

    Re: W/Pool/Ikea/Smeg DWF416

    I should have added that its a 45cm Fully intergrated model.

    Goose

    September 11, 2006 at 7:46 pm #188102
    eastlmark
    Moderator

    Re: W/Pool/Ikea/Smeg DWF416

    when you say “dead” do you mean no lights even? No error code then? what about feed to the circ pump? Its not cutting out due to a toc clicking out within the pump?
    It is a SMEG model.

    September 12, 2006 at 6:50 am #188103
    goosegreen
    Participant

    Re: W/Pool/Ikea/Smeg DWF416

    Hi Eastlemark
    The lights stay on the prog selected, Could be motor I am calling back later this week so will check.

    Goose

    September 13, 2006 at 4:38 pm #188104
    Seamy
    Participant

    Re: W/Pool/Ikea/Smeg DWF416

    Smeg Tech guys told me motor start caps & soap dispenser coils throw up strange faults on these machines, or cable connections to said parts.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.