Indesit DI620 Integrated – Error Code

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indesit DI620 Integrated – Error Code

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 13, 2006 at 11:29 am #20819
    Spike0907
    Participant

    Hi,

    I have an Indesit DI 620 integrated dish washer, which is stopping about ten minutes into the cycle, with hot water in the sump and the powder container still clipped shut. It will stay like that all night.

    There are four lights in the top of the door, the left hand two (lights 1 & 2) are flashing. Can anyone tell me what that particular code means, please?

    thanks

    Spike

    September 13, 2006 at 4:21 pm #188449
    iadom
    Moderator

    Re: Indesit DI620 Integrated – Error Code

    This is usually a drain time out fault, that means to say the machine has failed to empty in the allotted time due to pump failure or blockage.

    1+2 flashing can also be a software recognition error, a possibility it it is happening early in the programme.

    first one is not that difficult a fix, second one not easy.

    September 16, 2006 at 8:16 am #188450
    Spike0907
    Participant

    Re: Indesit DI620 Integrated – Error Code

    Pump checked and is OK. So it must be the programmer, right? Can I get a programmer, being an ordinary consumer person?

    thanks

    September 16, 2006 at 5:09 pm #188451
    iadom
    Moderator

    Re: Indesit DI620 Integrated – Error Code

    You can get most things but I would be wary of diving in and fitting expensive electronics without letting an experienced engineer have a look first to be honest.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.