- This topic has 5 replies, 4 voices, and was last updated 19 years, 6 months ago by
.
-
Posts
-
I find this very hard to believe, but anything is possible from the Indesit Company. 😥 anyone else seen anything like this. 😕
Re: WMA76 drum only has two bolts ????
Yeah had this a while ago, had to fit a new spider to a wma m/c, removed the 6 allen bolts holding the spider on [right t**ts to shift], but was only supplied with 3 replacement bolts, allegedly these where supposed to be adequate 😕 😳 ,so I put some off the old bolts on aswell just to be sure, no probs to date & that was 2 yrs ago!
take it easy dude , 8) Chris..Re: WMA76 drum only has two bolts ????
It is very common to see spiders with only three bolts, one in each arm, and was not a mistake, it was no doubt done as a cost saving exercise. I have yet to see one with only two bolts though.
Jim.
Re: WMA76 drum only has two bolts ????
Possible, but unlikely to have lasted until out of guarantee. 😉
However…
I had an interesting one today.
Beko WMA10 just over twelve months old with earth fault…. No heater bollard 😯 !!!
This is the second one I have seen with this problem this year… The first one I dismissed as possible coin damage as the customer had already had a dig about in the sump hose and removed several items, I assumed that the heater fixing had been discarded. Today’s one was an elderly lady who have never even touched the filter!
Things do get missed on a production line.
Bob
Re: WMA76 drum only has two bolts ????
I have heard of some recent Hotpoint machines coming out without a drum bearing seal. 😯
- You must be logged in to reply to this topic.