Hotpoint WMA30 prewash flashes at end

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMA30 prewash flashes at end

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 15, 2006 at 9:35 am #20877
    Seamy
    Participant

    What does pre-wash led flashing signify? Is it out of balance? Or not pumped out or no motor action? This fault has come up on a customers machine several times at end & clothes come out soggy but seems to have pumped out, i suspect out of balance load but would like this confirmed.

    September 15, 2006 at 9:53 am #188643
    iadom
    Moderator

    Re: Hotpoint WMA30 prewash flashes at end

    No, Final Spin led flashes for OOB conditions. Have you tried the ‘Last Error detected’ routine , you can find it in the ‘Known Error Codes ‘thread.

    Prewash light flashing indicates a fill time out, poor fill or possible draining on fill due to low outlet hose or syphoning.

    September 15, 2006 at 11:29 am #188644
    Seamy
    Participant

    Re: Hotpoint WMA30 prewash flashes at end

    Cheers Ian, i haven’t visited machine yet, but will check those things when i see it.

    Thanks

    September 15, 2006 at 2:50 pm #188645
    iadom
    Moderator

    Re: Hotpoint WMA30 prewash flashes at end

    Seamy wrote:Cheers Ian,

    “Cough” Jim. 😉 🙂

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.