Fault code F04 Whirlpool ADP4732al

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Fault code F04 Whirlpool ADP4732al

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 27, 2006 at 5:56 pm #21192
    KWW
    Participant

    My Whirlpool ADP4732al Service code 8511 506 15840 38 0434 006937 runs for about 15 minuets on any cycle the stops with the LED above the “start” button flashing & “F04” displayed in the cycle time window.

    Any ideas on what the fault is & where to start investigating?

    September 27, 2006 at 6:28 pm #189957
    gegsy
    Participant

    Re: Fault code F04 Whirlpool ADP4732al

    Hi
    If the water has drained, I would imagine you will be looking at a faulty Water Indicater (WI),clogged filters,gunge around the WI or faulty module/PCB.

    The WI is situated below the filters when removed at the 3 o clock position.
    Un plug appliance before invesitgating :plug:

    Greg

    September 28, 2006 at 9:25 pm #189958
    KWW
    Participant

    Re: Fault code F04 Whirlpool ADP4732al

    Thanks Greg.

    Any clues on how I check the WI & remove it. An exploded view may help, I’ve scoured the net, but, can’t find one.

    Regards
    Keith

    September 28, 2006 at 9:47 pm #189959
    gegsy
    Participant

    Re: Fault code F04 Whirlpool ADP4732al

    Hi
    If there is no crud or debris on the WI then its either faulty or the PCB is. Check connections from it to the PCB aswell.
    You can gently clean in the grill with a toothbrush, but be craeful not to puncture membrane behind 😉

    Greg

    May 31, 2007 at 10:50 pm #189960
    KWW
    Participant

    Re: Fault code F04 Whirlpool ADP4732al

    Two months ago I took a kettle & toothbrush & continualy brushed at a grid towards the back right with boiling water filling the supm. Then drained & repeated. The dishwasher has not faulted since, obviously full of crud.
    Thanks for the help.

    May 31, 2007 at 10:51 pm #189961
    gegsy
    Participant

    Re: Fault code F04 Whirlpool ADP4732al

    Most welcome and thanks for taking the time to update the post 😀

    Greg

    February 28, 2009 at 12:29 am #189962
    KWW
    Participant

    Re: Fault code F04 Whirlpool ADP4732al

    Dumped this dishwasher now got a Bosch & had no problems yet – touch wood!

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.