whirlpool g2p dwi not completing cycle

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › whirlpool g2p dwi not completing cycle

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 2, 2006 at 7:58 am #21319
    babyromeo
    Participant

    dishwasher bleeps continually after about five mins no matter what setting it is on.

    when you open door the inside is dry and the pre wash setting is lit

    the start button light flashes four times then there is a pause, then flashes four times and so on

    any help much appreciated

    October 2, 2006 at 8:14 am #190439
    gegsy
    Participant

    Re: whirlpool g2p dwi not completing cycle

    Hi
    Could you post up the 12 NC number, situated on door frame under barcode, cheers.

    Greg

    October 2, 2006 at 1:25 pm #190440
    babyromeo
    Participant

    Re: whirlpool g2p dwi not completing cycle

    there are two numbers on the door frame

    [service] 8542 347 15810

    [ser] 33 0435 009654

    are one of these the number you asked for

    many thanks once again

    October 2, 2006 at 5:19 pm #190441
    gegsy
    Participant

    Re: whirlpool g2p dwi not completing cycle

    Hi
    Ok then by what you have said in the first post I would imagine that you have
    1/ Clogged or dirty filters
    2/ Dirty or faulty Water Indicator (WI)
    3/ Faulty Module/PCB

    The WI is situated below in the sump below the filters when removed at a 3 o clock position.

    Un plug appliance before attempting any repair :plug:

    Greg

    October 4, 2006 at 3:18 pm #190442
    babyromeo
    Participant

    Re: whirlpool g2p dwi not completing cycle

    thanks for the help

    dishwasher now working

    wife confessed to tipping meat tin full of fat into dishwasher the night before it stopped working.

    good cleanout of filters/pumps solved the problem

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.