whirlpool g2p dwi not completing cycle

[babyromeo]

dishwasher bleeps continually after about five mins no matter what setting it is on.

when you open door the inside is dry and the pre wash setting is lit

the start button light flashes four times then there is a pause, then flashes four times and so on

any help much appreciated

[gegsy]

Re: whirlpool g2p dwi not completing cycle

Hi
Could you post up the 12 NC number, situated on door frame under barcode, cheers.

Greg

[babyromeo]

Re: whirlpool g2p dwi not completing cycle

there are two numbers on the door frame

[service] 8542 347 15810

[ser] 33 0435 009654

are one of these the number you asked for

many thanks once again

[gegsy]

Re: whirlpool g2p dwi not completing cycle

Hi
Ok then by what you have said in the first post I would imagine that you have
1/ Clogged or dirty filters
2/ Dirty or faulty Water Indicator (WI)
3/ Faulty Module/PCB

The WI is situated below in the sump below the filters when removed at a 3 o clock position.

Un plug appliance before attempting any repair :plug:

Greg

[babyromeo]

Re: whirlpool g2p dwi not completing cycle

thanks for the help

dishwasher now working

wife confessed to tipping meat tin full of fat into dishwasher the night before it stopped working.

good cleanout of filters/pumps solved the problem

[Author]

Posts