Fisher & Paykel Dishwasher 292T

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › Fisher & Paykel Dishwasher 292T

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 9, 2006 at 9:28 am #21516
    Aussiev8
    Participant

    I have a Fisher and Paykel dishwasher soft touch model 292T, when you turn the power on at the wall, a pump starts but no water?
    If you add water to the bottom of the dishwasher it then starts to wash, and doesn’t stop washing. No lights, on the panel light up?

    Any suggestion or help would be appreciated.

    Regards
    Aussiev8

    October 10, 2006 at 1:00 am #191177
    bigsmokepiker
    Moderator

    Re: Fisher & Paykel Dishwasher 292T

    OK Drain pump always comes on at start of any cycle
    But if no water coming it could be inlet valve or in some cases I have had problems with main power PCB (Located down bottom behnind kick panel)
    If you can hang 5 i do have some diagnostics but i will have to post later this arvo when i get access
    Regards

    October 26, 2006 at 5:17 pm #191178
    kandl-appliancerepair
    Participant

    Re: Fisher & Paykel Dishwasher 292T

    I think you may have water in the base of the appliance, the few ive worked on the lid motors are the main culprit for leaks on these appliances, or possibly something stopping the lid closing down, like a plate thts to big or something similar. If you pull out the bottom drawer and unclip the runners (each side of the drawerat the bottom behind the front panal) and see if there is water flooded.


    If there has it may have blowen the power board under the plastic cover.


    !!!If you do decide to check TURN THE POWER OFF!!!

    October 26, 2006 at 10:08 pm #191179
    bigsmokepiker
    Moderator

    Re: Fisher & Paykel Dishwasher 292T

    This model is not a dishdrawer type
    It is standard unit

    October 26, 2006 at 11:15 pm #191180
    Aussiev8
    Participant

    Re: Fisher & Paykel Dishwasher 292T

    Thank you for your help,
    We have now fixed the problem it was the main power board behind the kick panel.

    Regards
    Aussiev8 😀

    October 29, 2006 at 10:50 am #191181
    kandl-appliancerepair
    Participant

    Re: Fisher & Paykel Dishwasher 292T

    only ever worked on the dish drawers! didnt even realise they did another type!


    we havent got them over here, all we have is the Dish drawers, refrigeration and cooking products!!

    your a lucky lot over there!

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.