beko 2 same fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › beko 2 same fault

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 11, 2006 at 8:06 am #21585
    delta01
    Participant

    going tomorow both wont run , pre wash light flashing any idea’s please

    October 11, 2006 at 10:58 am #191765
    Washman
    Participant

    Re: beko 2 same fault

    Hi

    Try this reset
    the fix for flashing pre wash led, or flashing start/cancelbutton is

    Turn power button off (not at wall)
    Select 90 degree wash
    Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down – Start light will flash.
    Leave power on.
    Select any Spin position.
    Press Start and Cancel button at same time again for 3 seconds – other buttons may start to flash – if they do, press Start and Cancel button together again for 3 seconds.
    Machine should be re-set ready for use.


    Mike

    October 11, 2006 at 12:02 pm #191766
    delta01
    Participant

    Re: beko 2 same fault

    thanks mike will try that and keep you posted

    john

    October 11, 2006 at 2:00 pm #191767
    cab
    Participant

    Re: beko 2 same fault

    the procedure mike describes is the method on machines (wma1715s)with electronics manufactured before feb 2004. At the point where you select the spin if you press the start button, if a fault code is stored it will be indicated by the on or off position of the five leds on the right hand side.

    cab

    October 12, 2006 at 3:09 pm #191768
    delta01
    Participant

    Re: beko 2 same fault

    thanks guys both machines working one needed a pump the other just re-setting

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.