Creda T602CW Dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Creda T602CW Dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 12, 2006 at 3:10 pm #21636
    johnnyhoz
    Participant

    Hi

    have the above dryer, it runs and heats, its suppose to cut out when the clothes are dry but it runs continuously, has anyone come across this before. Would appreciate some guidance.

    John

    October 12, 2006 at 7:19 pm #191964
    SDR
    Participant

    Re: Creda T602CW Dryer

    if it has a module fixed in top rhs looking from front, replace that as it is a sensing module, check that the earthing brush is making contact or not broken. check that condenser is clear, also check that no build up of lint between door panel behind lint filter.. hope this helps .

    October 13, 2006 at 6:32 am #191965
    johnnyj
    Participant

    Re: Creda T602CW Dryer

    If you remove earthing brush from band it should come out of dry as this would indicate a high resistance, if so check the band is insulated from the drum, if it doesnt i would go for module i hope this helps you cheersjj.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.