Smeg intergrated dishwasher model DWI710 E1 error codes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg intergrated dishwasher model DWI710 E1 error codes

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 15, 2006 at 8:38 am #21712
    grazzamongrel
    Participant

    i have come across an intergrated SMEG dishwasher with lights 1, 2, and 3 flashing and light 5 lit permantly, this error code is not listed in the manual and i am wondering whether anybody out there can help as all SMEG want to do is send an engineer out so they obviously know the fault and wont tell me over thephone what the lighs mean…PLEASE HELP !!

    graham (ex hotpoint engineer if anybody needs help with hotpoint, indesit,creda)

    October 15, 2006 at 8:54 am #192260
    Penguin45
    Participant

    Re: Smeg intergrated dishwasher model DWI710 E1 error codes

    Hi Graham,
    Welcome aboard. Info is here:
    http://www.ukwhitegoods.co.uk/modules.p … 0&start=45 – page 4

    Reset procedure:
    Switch on and hit programme button 4 times within three seconds. LEDs 1 + 5 should light. Switch off, count to ten, switch on and run rinse programme.

    Chris.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.