- This topic has 4 replies, 4 voices, and was last updated 19 years, 5 months ago by
.
-
Posts
-
I have a Diplomat 8234 dishwasher. It has just started to become faulty. When you try to access the programs it sits at P0 and then goes to PC. (Normal programs are P1 to P6) . Can anyone help with this PC fault? Thanks ❓
Re: Diplomat ADP8234 PC fault
You are in the test programme somehow. To exit, switch on, wait three seconds and press the programme button twice, quickly. Switch off, switch back on and it should be OK.
Regards,
Penguin45.Re: Diplomat ADP8234 PC fault
Is the start light flashing? count how many flashes there are before a pause, and the number of flashes will reveal a fault code, let me know and i can tell you what the problem is.
the normal codes are 2 flashes – machine leak, 4 flashes – drainage problem, 6/7 flashes – either water inlet problem or “flow meter” failure.Re: Diplomat ADP8234 PC fault
kandl-appliancerepair wrote:Is the start light flashing? count how many flashes there are before a pause, and the number of flashes will reveal a fault code, let me know and i can tell you what the problem is.
the normal codes are 2 flashes – machine leak, 4 flashes – drainage problem, 6/7 flashes – either water inlet problem or “flow meter” failure.These don’t apply to this machine. Penguin 45 has the right one.
DP
- You must be logged in to reply to this topic.