Creda washing machine Mod W100FW

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Creda washing machine Mod W100FW

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • October 25, 2006 at 8:36 am #21990
    Ashby
    Participant

    Morning all, Can someone help with a wiring diagram for this machine please? It’s not heating. Element is ok.
    Thanks
    Ashby

    October 26, 2006 at 8:47 am #193307
    eastlmark
    Moderator

    Re: Creda washing machine Mod W100FW

    Dont have a wiring diagram but there is not much between the heater and the timer so i its not the heater, ntc or the wires its got to be the timer.

    October 26, 2006 at 9:57 am #193308
    Martin
    Participant

    Re: Creda washing machine Mod W100FW

    …..or the ‘Economy’ button has been pressed 😉

    October 26, 2006 at 6:03 pm #193309
    Ashby
    Participant

    Re: Creda washing machine Mod W100FW

    Hi Chaps, Thanks for your help. sorted that one. It was the economy button. However, it’s now on the rinse cycle and surges into a spin rather than a tumble.I’ve checked motor plug for loose connections and where it goes to the board. That all seems ok. Haven’t checked brushes yet. any other ideas? most gratefull. Thanks.
    Ashby

    October 26, 2006 at 6:14 pm #193310
    Bryan
    Participant

    Re: Creda washing machine Mod W100FW

    Ashby wrote: However, it’s now on the rinse cycle and surges into a spin rather than a tumble.

    These new models do that as a feature , so probably still nothing actually wrong with machine. If sump trap etc. partially blocked it`ll throw water back out the soap dispenser drawer at the rinse stage you describe.

    HTH

    Bryan

    October 26, 2006 at 6:26 pm #193311
    Ashby
    Participant

    Re: Creda washing machine Mod W100FW

    Thanks Bryan, but the machine has never done this before. After it has filled for the rinse, it surges into spin and throws the machine across the floor.Strange?
    Ashby.

    October 27, 2006 at 6:18 pm #193312
    Ashby
    Participant

    Re: Creda washing machine Mod W100FW

    Hi, I’m still having problems with this machine. after filling for a rinse instead of going into a distribute it does a very fast spin knocking the machine around the floor. it does this a couple of times then stops. I’ve had the board checked. That’s ok. checked for loose wiring, the motor is ok too. I’m Baffled. Anyone else had the same problem?
    Thanks
    Ashby. 😥

    October 27, 2006 at 10:36 pm #193313
    iadom
    Moderator

    Re: Creda washing machine Mod W100FW

    Has it got an FHP motor, if so check that the tacho magnet has not come loose. you need to prise off the metal disc to see it. Easy to refit.

    Jim.

    October 28, 2006 at 7:45 am #193314
    Ashby
    Participant

    Re: Creda washing machine Mod W100FW

    Thanks Jim, I did check the tacho with multimeter, that was ok. I didn’t take it apart though. I’ll do that monday.
    Much appreciated.
    Ashby (it is FHP motor)

    October 28, 2006 at 9:33 am #193315
    PGS
    Participant

    Re: Creda washing machine Mod W100FW

    Your gonna have to fit a motor im afraid.

    October 28, 2006 at 5:01 pm #193316
    roy1
    Participant

    I hav re-fitted the FHP tacho magnet removing the
    disc ,turning the magnet over and re-fitting with
    superglue never been back to one .
    Roy

    October 28, 2006 at 6:54 pm #193317
    Ashby
    Participant

    Re: Creda washing machine Mod W100FW

    Hi, Thanks PGS and Roy1, The customer rang today and said she’s been and bought a new machine.
    Thanks.
    Ashby

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.