Zanussi FJR1254W Error Code E90

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi FJR1254W Error Code E90

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • November 9, 2006 at 5:49 pm #22418
    biggoolie
    Participant

    Can anyone tell me what this error code signifies, I’m going to the machine tomorrow but the fault code is’nt listed on those already posted. Thanks a bunch.

    November 9, 2006 at 7:16 pm #194863
    Penguin45
    Participant

    Re: Zanussi FJR1254W Error Code E90

    Comms error. Wiggling the ribbon cables between the boards usually sorts it… Most of the time…

    Chris.

    November 9, 2006 at 7:37 pm #194864
    AMS
    Participant

    Re: Zanussi FJR1254W Error Code E90

    E90 is the user code. You’ll need to go into the diagnostics mode to see what the specific code is. It could be anything from E91 to E94. In my experience, these codes usually end up with a pcb change.
    🙁
    Dave

    November 9, 2006 at 10:17 pm #194865
    cab
    Participant

    Re: Zanussi FJR1254W Error Code E90

    front user board has allways been a problem on these machines from conception, E91 comunications error between userpcb and main pcb, very rairly main pcb.

    cab

    November 10, 2006 at 12:08 am #194866
    scots
    Participant

    Re: Zanussi FJR1254W Error Code E90

    I have the same prob E90. its intermettent, when I tried, it started within a second or so.
    Reset and worked ok, functionally tested and ok… WEIRD!!!
    Anyone else got any ideas?

    November 10, 2006 at 9:10 am #194867
    Martin
    Participant

    Re: Zanussi FJR1254W Error Code E90

    scots wrote:Anyone else got any ideas?

    I second the comments of the previous postee’s. Wiggle your ribbon cables or better still take both ends off and pinch the blocks before refitting…sorted! 😉

    November 10, 2006 at 12:04 pm #194868
    scots
    Participant

    Re: Zanussi FJR1254W Error Code E90

    Worth a go, will try next week and post the result.
    Thanks

    November 10, 2006 at 4:59 pm #194869
    biggoolie
    Participant

    Re: Zanussi FJR1254W Error Code E90

    Thanks for the replies, seems like this is quite a common fault, going back tomorrow so will try these ribbon cable connections, thanks again.

    November 10, 2006 at 6:39 pm #194870
    bobokines
    Participant

    Re: Zanussi FJR1254W Error Code E90

    I bet you will find coffee stains down the front of the machine!


    Bob

    November 10, 2006 at 9:12 pm #194871
    admin
    Keymaster

    Most of intermittent E9_ cases in me were dirty PCB around ULN2003 (SMD) in user interface electronic. If don’t work at all and shows only E9_ was ULN it self (changing remove problem).

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.