Tricity Onyx 951W

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Tricity Onyx 951W

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 14, 2006 at 5:37 pm #22545
    User0800
    Participant

    The temperature of both my ovens in my double oven having lost control and the temperature inexorably rising, I assumed this to be a failed thermostat problem and duly replaced them. However, this has not proved to be the solution.

    Though I am certain that I have wired them both correctly, and the bottom oven seems to be fine, if the bottom oven is on then the top oven heats up as well. Furthermore the temperature of this oven still continues to rise.

    Was I wrong to assume that the thermostats were at fault? Could it be the cut-outs are the problem? Or can you suggest what else might be the cause.

    Stuart

    November 15, 2006 at 12:41 am #195442
    Penguin45
    Participant

    Re: Tricity Onyx 951W

    No temperature control can often be an earth leakage problem. Engineer time……..

    Click the link below for a UKW engineer in your area.

    Regards,
    Penguin45.

    November 15, 2006 at 8:35 am #195443
    User0800
    Participant

    Re: Tricity Onyx 951W

    Thanks for your reply Penguin.

    Am I to be calling out someone to fix the oven or the cable to the oven?

    In other words are you suggesting that earth leakage is from the oven or the connection.

    Stuart

    November 15, 2006 at 9:19 am #195444
    Penguin45
    Participant

    Re: Tricity Onyx 951W

    Most likely internal – probably the element (s).

    Stay safe if you’re going to investigate further – power off.

    Penguin45.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.