Whirlpool FH fault code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool FH fault code

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 24, 2006 at 8:09 pm #22846
    geoffmackay
    Participant

    Whirlpool AWM6141/S. Flashing FH on rinse cycle. Plenty of pressure to cold single valve and have changed fill valve. Ran 3 washes ok then has faulted again. Any offers?

    Geoff

    November 24, 2006 at 9:49 pm #196289
    johnmac11
    Participant

    Re: Whirlpool FH fault code

    Hi Geoff,

    All the Whirlpool fault codes are in the “known error codes” thread, 1st thread in this forum.


    John

    November 25, 2006 at 1:29 am #196290
    gegsy
    Participant

    Re: Whirlpool FH fault code

    Hi Geoff
    It may be worth removing and cleaning the pressure bottle (next to heater) and checking operation and contacts on pressure switch. 😉

    Greg

    November 25, 2006 at 7:47 am #196291
    SparkyP
    Participant

    Re: Whirlpool FH fault code

    Hi Geoff
    Had one doing the same yesterday . Check the waste hose is not siphoning the water away. Has the customer moved machine? Also check the contacts on the pressostat.
    Hope this points you in another direction as you have changed the valve.

    Sparkyp

    November 25, 2006 at 10:39 am #196292
    geoffmackay
    Participant

    Re: Whirlpool FH fault code

    Thanks guys, haven’t checked pressure system. Went straight for the kill and changed valve.

    August 5, 2008 at 5:36 pm #196293
    Minge
    Participant

    Re: Whirlpool FH fault code

    Hi i had this fault today. I cheacked the pressure switch and also cleaned outthe chamber by the element. customer phoned back and said same fault. do you think it will be the pressure switch.

    August 5, 2008 at 6:02 pm #196294
    timdowning
    Participant

    Re: Whirlpool FH fault code

    Did you change the cold valve? Had a call yesterday where the valve was intermittantly playing up. I changed just the coil and all is well.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.