Smeg DW1612c Dishwasher Leaking

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg DW1612c Dishwasher Leaking

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 29, 2006 at 9:57 am #22949
    Twoten
    Participant

    The above integrated dishwasher starts to leak at the lower edge of the door after about 25 minutes once the water gets hot.

    I have removed the door panels and noticed there are signs of leaking along the edge of the bottom door seal. I have removed the door seal checked for damage, cleaned and replaced but the problem persists.

    The water level looks OK. The only option I can see is replace the seal but as I can’t see a problem with the old one I’m not convinced this will resolve the problem.

    Is this a know problem with these machines?

    Any ideas would be appreciated.

    November 29, 2006 at 12:24 pm #196621
    eastlmark
    Moderator

    Re: Smeg DW1612c Dishwasher Leaking

    Not a common problem at all, dont want to suggest the obvious but have you checked for clean and free turning spray arms?

    November 29, 2006 at 1:49 pm #196622
    Twoten
    Participant

    Re: Smeg DW1612c Dishwasher Leaking

    eastlmark wrote:dont want to suggest the obvious but…

    It’s the obvious that gets missed so any suggestion is welcome.

    I did have a quick look at the spary arms but thought it would have leaked before it got hot.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.