- This topic has 3 replies, 4 voices, and was last updated 19 years, 4 months ago by
.
-
Posts
-
can some one advise how to reprogram a wma 10 control board as ive lost the instructions to reprogram it and hotpoint wont send me another sheet due to having the board for 8 months in my spares cupboard.
also ive got a hotpoint wma 9 washer it fills and turns acouple of times then releases the interlock and flashes door is unlocked any idea i think its a board proble
Re: how to reprogram hotpoint wma 10 control board
With selector in off position press and hold rinse hold and energy save buttons whilst selecting k program and continue to hold until lights flash (5 secs) , now press start button til all lights go out . now select M press start , P press start , A press start twice , job done
Re: how to reprogram hotpoint wma 10 control board
Hi Andysam,
if you send me your e-mail I’ll send you a copy config sheet.
on your WMA9 try checking the wiring close to the plug on the motor the wires sometimes break at the plug but the sleeve stays intact.
Alan
- You must be logged in to reply to this topic.