AEG OKO LAVAMAT 1370 – Out of Control!!

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › AEG OKO LAVAMAT 1370 – Out of Control!!

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 3, 2006 at 2:29 pm #23058
    sjl104
    Participant

    The machine is stopping intermittently during a programme….moving the selector knob or pushing the pause/start button has no effect. The only thing it seems to respond to is a power off and then back on….still will not finish the programme though!!
    I think it may be the electronic programme controller, can anyone confirm this pls…

    Numbers on what I believe to be the controller (plastic enclosed module the control knob spindle is attached to!!) as follows:

    124550501
    2696 T86

    Any advice would be gratefully rx’d…thanks.

    December 3, 2006 at 3:50 pm #196897
    clivejameson
    Participant

    Re: AEG OKO LAVAMAT 1370 – Out of Control!!

    Could be a host of things….kinked fill hose, failed inlet valve, failed heater, failed/blocked pump, or indeed a faulty pcb 😕

    Time to get your multimeter out, or call for an engineer really….power off if investigating further.

    December 3, 2006 at 8:42 pm #196898
    sjl104
    Participant

    Re: AEG OKO LAVAMAT 1370 – Out of Control!!

    Thanks for the info, I don’t have the time to dig into the machine so will have to resort to the phone tomorrow. Appreciate your reply.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.