creda simplicty 1000

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › creda simplicty 1000

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 10, 2006 at 4:59 pm #23264
    fasetester
    Participant

    hi guys i would like some help with a creda simplicty 1000 washing machine when you put it on it will not work i checked the interlock when you remove it from the machine and push the lach across on the interlock it works ok so is the problum with the striker plate on front of the interlock as the lach on the door is made of metal or can the spring in the lach get weak thanks for any help 😕 fasetester.

    December 10, 2006 at 5:13 pm #197562
    wilf
    Participant

    Re: creda simplicty 1000

    try changing the interlock first it might be worn. then look at door latch and or distortion on the front panel or hinge.

    wilf

    December 10, 2006 at 5:47 pm #197563
    Penguin45
    Participant

    Re: creda simplicty 1000

    One end of the catch spring will have become disconnected.

    Chris.

    December 11, 2006 at 8:03 pm #197564
    fasetester
    Participant

    Re: creda simplicty 1000

    thanks wilf and chris for your reply when you go to do a wash and give the door a slight slap it will work is that the spring on the lach what about the plate on front of the interlock could it be worn the striker plate thanks fasetester 🙂

    December 11, 2006 at 8:09 pm #197565
    Martin
    Participant

    Re: creda simplicty 1000

    What model number machine are we talking about here fasetester?

    December 12, 2006 at 12:27 am #197566
    fasetester
    Participant

    Re: creda simplicty 1000

    hi martin it is a creda simplicty 1000 but i will have to check the model no and get back to you the next time iam in i just replaced the door hinge on the same machine its the second hinge in a short while why are the hinges so bad qualty its the mother in laws machine 😉 fasetester

    December 12, 2006 at 12:55 am #197567
    Penguin45
    Participant

    Re: creda simplicty 1000

    People lean on the door when they stand up……

    Chris.

    December 12, 2006 at 12:21 pm #197568
    fasetester
    Participant

    Re: creda simplicty 1000

    can the striker plate that screws to the front of the interlock cause the lach on the door not line up right if it is wore. chris. 🙂 fasetester

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.