Miele g638 plus

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele g638 plus

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 13, 2006 at 7:15 pm #23353
    LittleMan
    Participant

    Hi
    Can any one tell me why after a few seconds of starting this machine starts , inlet/outlet flashes 5 times stays on then starts flashing again

    can you help please
    les

    December 13, 2006 at 9:54 pm #197841
    msappliance
    Participant

    Re: Miele g638 plus

    Normally this fault is not filling quick enough.
    try checking fill filters, not syphoning and good water pressure.

    December 14, 2006 at 4:53 pm #197842
    LittleMan
    Participant

    Re: Miele g638 plus

    Hi
    this machine goes into drain then for a split second trys to fill then starts flashing and it is only for a split second
    HELP Les

    December 14, 2006 at 6:52 pm #197843
    msappliance
    Participant

    Re: Miele g638 plus

    can you select spin or rinse on its own?

    December 14, 2006 at 6:57 pm #197844
    msappliance
    Participant

    Re: Miele g638 plus

    ignor last comment just noticed its a d/w will try to get back 2 u

    December 14, 2006 at 7:12 pm #197845
    msappliance
    Participant

    Re: Miele g638 plus

    ok try this, strip down appliance filters make sure circ motor is free, you can turn the impeller here.
    If stuck motor faulty if free change pressure switch had this fault before just making sure.

    December 15, 2006 at 12:23 am #197846
    eastlmark
    Moderator

    Re: Miele g638 plus

    would check for water in the drip tray first.

    December 16, 2006 at 8:31 pm #197847
    msappliance
    Participant

    Re: Miele g638 plus

    If had water in drip tray i would expect drain pump to aways run.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.