Bosch SGS3042GB/01 Fill cycle.

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch SGS3042GB/01 Fill cycle.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 14, 2006 at 4:44 pm #23374
    vonick
    Participant

    Hi Folks.
    My Dishwasher works just fine but latley has been keeping me up during the night. The problem is that it will turn the water inlet valve on and off about 20 times during the fill cycle, this in turn makes the plumbing knock.
    I have checked the electrical supply to the inlet valve and found that it is in fact being turned off and then back on during the fill.
    I can’t recall this ever happening in the past. Could this be a fault with the water level sensor, or is this a normal fill cycle. 😕

    Any help would be welcome.
    Thanks in advance.

    Bosch SGS3042GB/01

    December 14, 2006 at 4:49 pm #197913
    Martin
    Participant

    Re: Bosch SGS3042GB/01 Fill cycle.

    It’s usually due to the transfer pipe between the fill matrix to the tub that gets crudded up and needs cleaning! 😉

    Little tip…..never go to bed leaving things like dishwashers working. When you hit the sack and turn out the lights, turn off your gadgets as well. 😉

    December 16, 2006 at 9:13 am #197914
    vonick
    Participant

    Re: Bosch SGS3042GB/01 Fill cycle.

    Thanks Martin
    Top advice. Fault fixed as you indicated.
    Thanks
    Vonick. 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.