Whirlpool ADG 957 – Dishwasher Replacement Power Switch

Home Forums Public Support Forums Help And Support Dishwasher Help Forum Whirlpool ADG 957 – Dishwasher Replacement Power Switch

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #23492
    gdury
    Participant

    Hi
    I’m trying to find a replacement mains power on/off switch which is located within the front door DREEFS control panel.
    The mains power switch is a ‘T’ shaped item with the spade contacts at the bottom end. The casing says wi39/01. I cannot find the switch anywhere.
    The DREEFS control unit has the following markings:
    07-0130.3006
    D.03.12.01 282
    UB-P5-Z0-A2

    The model serial No is 33 0204 010531

    Any help would be appreciated

    #198310
    Martin
    Participant

    Re: Whirlpool ADG 957 – Dishwasher Replacement Power Switch

    Is the part you need part of the main Control Board? (Part No: 481221838067)…or is it the Door Microswitch you are after?

    #198311
    gdury
    Participant

    Re: Whirlpool ADG 957 – Dishwasher Replacement Power Switch

    Martin

    Yes it is a part within the main control panel, the ‘T’ shaped mains toggle switch sits in a moulded area of the housing. It can easily be removed once the two spade connectors are removed. I’am sure the mains switch is at fault as a power tester shows the supply is adequate to the switch, but not beyond. I don’t want to spend +£50.00 on a new control panel when hopefully i can source the replacement toggle switch. I’m trying to find a more detailed drawing of the DREEFS control panel with no success.
    The only item i have come across is the following PDF for parts of the dishwasher:
    http://bauknecht.dw-gmbh.net/zeichnungen/gsx4756.pdf
    It is not the door microswitch, The item is within 6200. Thanks for your help

    #198312
    Martin
    Participant

    Re: Whirlpool ADG 957 – Dishwasher Replacement Power Switch

    Then I’m sorry that we cannot help you other than supplying you with a complete unit. Individual components on a board like this are not generally available to us in the trade. Besides time costs money and messing around with components is not something we would even attempt let alone be bothered trying when sticking a new board in will sort. (if you catch my drift?) 😉

    Sorry 😕

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.