Zanussi FX1465W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi FX1465W

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 21, 2006 at 6:24 pm #23558
    effzedarr
    Participant

    Hi , never had much to do with these m/cs but hey ho, door interlock kept clicking, on inspection the lock had a slight burn mark in the centre of it so I ordered & fitted a new one! Fit new one select a prog ,same agian just click, click then a bleep & end prog neon flashing! Any clues please!
    Prod # 914792705/00.
    regards Chris..

    December 21, 2006 at 7:04 pm #198557
    Bryan
    Participant

    Re: Zanussi FX1465W

    Unfortunately when these door interlocks go faulty they have a habit of blowing the electronics. Sometimes manage to re-solder damaged tracks other times EMW or QER for repair :(.

    Oh for the good old days of replacing door interlocks or pumps or motors etc. and onto the next job.

    Hope that helps.

    Bryan

    December 21, 2006 at 7:35 pm #198558
    effzedarr
    Participant

    Re: Zanussi FX1465W

    Yes Bryan ,for the good old days,oh well at least he has a spare washer, only it’s an Indesit 😡 .
    Chris..

    December 21, 2006 at 7:46 pm #198559
    Bryan
    Participant

    Re: Zanussi FX1465W

    From memory QER will repair this board for £30 , so the situation might still be salvageable :). Might be worth a phone call at least.

    Bryan

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.