Zanussi Aquacycle 1200 – we have no hot water supply

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi Aquacycle 1200 – we have no hot water supply

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 30, 2006 at 10:26 am #23691
    tdubya
    Participant

    due to a faulty boiler. Is it possible to run the machine just using the cold water fill and allowing the washing machine to heat up the water ?

    Or does it not work like that ?

    Thanks for any advice.

    Dub

    December 30, 2006 at 10:43 am #199022
    Simon46
    Participant

    Re: Zanussi Aquacycle 1200 – we have no hot water supply

    As long as there is water supply to the hot inlet valve the machine will take care of it. Other wise a Y piece so that both hoses are connected to the cold water will be required. (see link below)

    http://tinyurl.com/yjvby5

    Regards
    Simon

    December 30, 2006 at 11:30 am #199023
    tdubya
    Participant

    Re: Zanussi Aquacycle 1200 – we have no hot water supply

    Ahh.. there’s the rub..

    We don’t have any hot water supply at all due to a broken pressure vessel in our boiler.

    The instructions do indicate though that if you select the right programme then the machine will only draw water from the cold inlet. This is what we’ve done for now.

    Thanks for the reply

    Dub

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.