smeg dwd 1sse

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › smeg dwd 1sse

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 1, 2007 at 6:12 pm #23731
    LittleMan
    Participant

    Hi
    Can any one tell me why this dishwasher will not start we select p1 press start prog time comes up then drain pump starts on for split sec then back to p1. this happens on all programes.
    can any one help
    Thanks LES

    🙂 ALL THE BEST 2007 🙂

    January 1, 2007 at 7:04 pm #199161
    eastlmark
    Moderator

    Re: smeg dwd 1sse

    sounds like the good old dispenser coil gone phut. Slave on a solonoid valve coil to test it if you havent got a dispenser.

    January 7, 2007 at 5:43 pm #199162
    keithwilliams
    Participant

    Re: smeg dwd 1sse

    thanks for that i’ll give it a try on mine.
    prob i’ve been having is that after a few days rest it would do one wash then i’d get these same symptoms. i was a bit cheesed off having already repaired a faulty diverter.
    i had suspected a moisture seepage during the successful wash. sounds like it could be a leaking soap box seal.

    January 7, 2007 at 5:56 pm #199163
    LittleMan
    Participant

    Re: smeg dwd 1sse

    Hi
    Thanks for your advice about dispenser it worked but do you know the price of new and who has it in stock.
    Many thanks
    Les

    January 7, 2007 at 6:30 pm #199164
    Alanj
    Participant

    Re: smeg dwd 1sse

    Hi Les,

    is the solenoid on your dispenser round or a red square one?If it’s round you need dispenser complete SMG 812890061 £23.99, if it’s a square one you can get Dispenser SM16100 for £9.99 and use the solenoid from it to replace faulty one, both from Masterpart.

    Alan

    January 7, 2007 at 7:36 pm #199165
    eastlmark
    Moderator

    Re: smeg dwd 1sse

    Careful here guys, the red solonoid was rubbish and caused lost of modules to fail, and not fitted for years, the other thing to look out for is a duff pcb energising the dispenser coil continuously. If the flap opens at switch on then you have an expensive problem and the dispenser will fail again.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.