Hygena hob control failed (again)

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Hygena hob control failed (again)

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 6, 2007 at 6:21 pm #23904
    Phil_s
    Participant

    Hi there,
    I have a Hygena Hob AHY1120. I originally fitted one about 7 years ago. After about 5 years this failed (the control knob to the largest ring stopped turning). After a while I replaced the hob with another exactly the same. Big mistake because now after just two years I have exactly the same problem. Is there anything easy I can do about this? Is this a common fault with these hobs? If I have to replace, is there another more reliable hob with the same footprint (I don’t want to have to replace the worksurface)?
    Any help welcome.
    kind regards
    Phil

    January 6, 2007 at 6:39 pm #199800
    Penguin45
    Participant

    Re: Hygena hob control failed (again)

    Sorry, we cannot advise.
    http://www.ukwhitegoods.co.uk/modules.p … ic&t=16259

    Regards,
    Penguin45.

    January 6, 2007 at 6:42 pm #199801
    Phil_s
    Participant

    Re: Hygena hob control failed (again)

    Hi,
    I presume that this is because it would need to de dismantled and I am not allowed to do that. If so, that is fine. Can you tell me if it is repairable by an engineer, or do I just cut my losses and replace it?
    Kind regards
    Phil

    January 6, 2007 at 6:55 pm #199802
    msappliance
    Participant

    Re: Hygena hob control failed (again)

    Yes an engineer should be able to repair this fault.

    January 8, 2007 at 12:51 am #199803
    wsts
    Participant

    Its an easy repair, at the worst the tap only needs regreasing,have sorted this problem loads before when I used to do their warranty work with stoves.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.