Energy regs, nut fitting – UK Whitegoods

This topic has 5 replies, 3 voices, and was last updated 19 years, 3 months ago by eastlmark.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
January 11, 2007 at 3:54 pm #24044

eastlmark
Moderator

Anyone know fo a source of Ego energy regs (any make but must be the flat, EGO shape) that still use the threaded shaft/nut type of mounting? (rather than the now common 2 screw method) Needed for a whirlpool hob, no room to fit a diamonH stlyle, single circuit.

January 11, 2007 at 4:19 pm #200349

johnmac11
Participant

Re: Energy regs, nut fitting

Have you got a model number Mark?
I have some of these old switches in the store.

John

January 11, 2007 at 7:42 pm #200350

goosegreen
Participant

Re: Energy regs, nut fitting

Mark try ELE 4109 from Connect, EGO type with nut fixing.

Goose

January 11, 2007 at 9:17 pm #200351

eastlmark
Moderator

Re: Energy regs, nut fitting

johnmac11 wrote:Have you got a model number Mark?
I have some of these old switches in the store.

John

Its a ETH1240ws part number is 481227328045

thanks John and Goose that one may do it depends on the knob fitting.

January 12, 2007 at 12:25 pm #200352

johnmac11
Participant

Re: Energy regs, nut fitting

Hi Mark,

I checked and have not got the part you mentioned. I just noticed that there are two versions of this hob, the part number you mention is obselete but the switch on the other version is still available.

If your hob has a service number of 81/0685-00.02 then the switch is 481927328279

John

January 12, 2007 at 4:42 pm #200353

eastlmark
Moderator

Re: Energy regs, nut fitting

Thanks John, I know that and do you know what the difference is between the 2 models? Yep, mounting of regulators! Hence I turned up with the wrong one.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.