Indesit WIL103UK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WIL103UK

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 17, 2007 at 4:29 pm #24219
    iadom
    Moderator

    Going out Friday to this, customer says hubby has checked fuse and verified power to the mains filter. She says that the machine is completely dead, no lights, nothing at all. No warning, worked perfectly on last use.

    Don’t have any wiring diagrams for these, does it sound like main PCB or console module failure? 😥

    Jim.

    January 17, 2007 at 6:03 pm #201179
    scots
    Participant

    Re: Indesit WIL103UK

    Hi Just a thought, how did customer check power to mains filter. I remember a customer swearing that power was at machine. When I tested there was no neutral, the guy had used a mains tester you know the screwdriver kind.

    Apart from that it sounds like main PCB

    Brian

    January 17, 2007 at 8:43 pm #201180
    iadom
    Moderator

    Re: Indesit WIL103UK

    He is a spark Brian, not a close friend but I do know him.


    Jim.

    January 18, 2007 at 4:04 pm #201181
    admin
    Keymaster

    Jim, I think is monofase motor… I will send it to you in few hours (when I arrive at home), by mail

    Baron

    January 18, 2007 at 4:46 pm #201182
    admin
    Keymaster

    Is allready send.
    I hope it will help you

    Cheers

    January 18, 2007 at 4:50 pm #201183
    iadom
    Moderator

    Re: Indesit WIL103UK

    Thanks Baron, just arrived. Unfortunately the motor was fine on this machine, customer has decided to invest in something a little better.

    The info you sent is very welcome though. I’m sure I will be able to make use of it in the future.

    Thanks again.

    Jim. :tup:

    January 18, 2007 at 5:31 pm #201184
    admin
    Keymaster

    My pleaser…

    Note:I didn’t though that motor is faulty… I just said that model is with simply motor (monofase not trifase).
    See you

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.