Hotpoint wmm 65a 1600 ultima

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint wmm 65a 1600 ultima

Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • Author
    Posts
  • January 17, 2007 at 9:12 pm #24238
    flash
    Participant

    Hi need some help with this one please. had a call today on this 1600 ultima . the costomer said there was no drum action. I dont have a manual for this one , so I set the machine on a spin machine started ok then short spin and shut down there was no burnt tracks on any of the boards brushes ok any ideas please GLEN

    January 17, 2007 at 10:39 pm #201235
    iadom
    Moderator

    Re: Hotpoint wmm 65a 1600 ultama

    Will send you some info on WMA62, very similar machine, might help.

    Jim.

    January 17, 2007 at 11:17 pm #201236
    Alanj
    Participant

    Re: Hotpoint wmm 65a 1600 ultama

    Hi Flash,

    have you checked for the usual chaffed wiring underneath near front at balance weight, or broken wires inside insulation at motor plug?

    Alan

    January 18, 2007 at 1:22 am #201237
    flash
    Participant

    Re: Hotpoint wmm 65a 1600 ultama

    thanks boys I am Im calling back to the job tommorow and I will let you know how I get on Glen

    January 29, 2007 at 6:18 pm #201238
    flash
    Participant

    Re: Hotpoint wmm 65a 1600 ultama

    Hi been out to put the machine on test it had error E30 I had a replacement motor in van 1604117 ac motor kit . But still the same .
    Can anybody tell me if the chopper board is ment to be included in this motor kit becouse there was only motor in the box if not could the problem be the chopper board or the power mod ❓

    Glen

    January 29, 2007 at 7:11 pm #201239
    iadom
    Moderator

    Re: Hotpoint wmm 65a 1600 ultama

    That motor should be a DC motor, you have the correct part number though. E30 is tacho fault. If you get the same with a new motor I would strongly suspect a wiring fault. Never had to change a Chopper board on these yet. The individual wiring harness for each block is available, motor to chopper board harness is a 1603764, less than a fiver so well worth a punt.

    Jim.

    January 29, 2007 at 7:29 pm #201240
    flash
    Participant

    Re: Hotpoint wmm 65a 1600 ultama

    Thanks jim I will go back tommorow . and test the motor wireing loom

    Glen

    January 30, 2007 at 9:25 pm #201241
    HotDog
    Participant

    Re: Hotpoint wmm 65a 1600 ultima

    Had three diffrent wma 1600 machines before christmas all no motor action they all turned out to be the chopper board very strange really never had any problems with this board ever

    January 30, 2007 at 10:05 pm #201242
    iadom
    Moderator

    Re: Hotpoint wmm 65a 1600 ultima

    Hi Cliff, hows things?

    What fault symptoms did these machines display?

    Jim.

    January 31, 2007 at 9:45 am #201243
    Tubs
    Participant

    Re: Hotpoint wmm 65a 1600 ultima

    Last one I had turnd out to be chopper board. Fault description, no drum action

    Steve

    January 31, 2007 at 8:57 pm #201244
    HotDog
    Participant

    Re: Hotpoint wmm 65a 1600 ultima

    Hi jim all the machines had same fault no motor action

    January 31, 2007 at 9:05 pm #201245
    HotDog
    Participant

    Re: Hotpoint wmm 65a 1600 ultima

    sorry must be groundhog day

    January 31, 2007 at 9:14 pm #201246
    iadom
    Moderator

    Re: Hotpoint wmm 65a 1600 ultima

    No its you Cliff, have you not got broadband yet you old Luddite.

    Removed the duplicate posts for you.

    Jim.

    January 31, 2007 at 10:17 pm #201247
    HotDog
    Participant

    Re: Hotpoint wmm 65a 1600 ultima

    Thanks Jim just woke up had this o’rrible dream that hotpoint had been taken over by indesit and produced a horrible tumble dryer called a VTD00. Phew i’ll go and have a stiff drink now and hope everythings alright in the morning.

    February 1, 2007 at 12:18 am #201248
    Alan1476
    Participant

    Re: Hotpoint wmm 65a 1600 ultima

    HI there

    Had this fault a couple of weeks back and it turned out to be a chopper board. 😀 No drum action.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • You must be logged in to reply to this topic.