ROSIERES

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #24248
    APG
    Participant

    Hello

    We went out to a customer who owns a Rosieres range cooker.
    There is no rating plate, sticker or any information on the appliance to obtain model, serial and product/cabinet numbers on the appliance at all.

    It requires:

    left oven left door hinge
    left oven right door hinge
    left oven base element
    left oven base element
    left oven door seal
    Right hob back left burner cap
    Right front back right burner cap
    Right hob front left burner cap
    Right hob front right burner cap

    As I understand, there are eight models for the Rosieres Paul Bucose version and the appliance is over ten years old
    GIAS cannot help as there is no model number, etc.

    Regards
    Andy G.

    #201285
    Dave_Conway
    Participant

    Re: ROSIERES

    Have you checked inside the right hand warming drawer (take it right out) ?

    The model number is in there, it will be either 2040?? or 4040??

    Dave.

    #201286
    silverbroom
    Participant

    Re: ROSIERES

    Hi Andy,
    I have exploded view of Rosiers 4040 including part number list if you want.

    Victor

    #201287
    APG
    Participant

    Re: ROSIERES

    Dave

    I have stripped this thing right down and inspected every part, panel, drawer and even the customers floor, just incase the sticker got hot and fell under the appliance but still nothing.
    Thanks all the same. I think it is a 4040

    Cheers Dave

    Andy G.

    #201288
    Dave_Conway
    Participant

    Re: ROSIERES

    There’s another way to tell with these.

    On the 2040 all 7 knobs are the same, on the 4040 the gas knobs for the 4 burners differ to the oven and large left hand burner.

    If you get the customer to check by pulling them off and see if they fit (they all look the same but the shaft size differs) 🙂

    Dave.

    #201289
    APG
    Participant

    Re: ROSIERES

    Yep, all knobs are the same and the shafts are the same size too.
    Dave, can we buy the parts from yourselves?

    Andy G

    #201290
    silverbroom
    Participant

    Re: ROSIERES

    Andy check your e-mail have sent exploded views.

    Victor.

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.