Bosch SRS4312GB/08 Intermittenet fill

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch SRS4312GB/08 Intermittenet fill

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 21, 2007 at 10:16 pm #24349
    Marsh
    Participant

    Usually fills for first cycle then drains and doesn’t fill again. Adding water allows it to continue but will sometimes continue to end of cycle, usually not!! I have changed the Inlet valve, checked micro switches and all the tubes and pressure sensor etc. on the left hand side. All pipes appear clear. Also removed and checked control module for dry joints, re seat of connectors etc.
    Any ideas?

    January 22, 2007 at 9:07 am #201750
    clivejameson
    Participant

    Re: Bosch SRS4312GB/08 Intermittenet fill

    Is there sufficient water pressure/flow rate on the supply?

    January 22, 2007 at 1:25 pm #201751
    Marsh
    Participant

    Re: Bosch SRS4312GB/08 Intermittenet fill

    Yes the water pressure and flow are good, I thought the supply pipe might be kinking when I pushed the machine back in place so I have checked the flow and tested it pulled out. Thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.