Diplomat 8702 washer dryer module

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Diplomat 8702 washer dryer module

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 22, 2007 at 10:03 am #24358
    Simon46
    Participant

    What is the 5460 number for this dead merloni servis module?

    Regards
    Simon

    January 22, 2007 at 1:49 pm #201768
    eastlmark
    Moderator

    Re: Diplomat 8702 washer dryer module

    2 versions of that one, an APM8702 0 (546023700) and APM8702/1 (546060201) My bet it will be the latter, doing tons of them right now.

    January 22, 2007 at 3:43 pm #201769
    Simon46
    Participant

    Re: Diplomat 8702 washer dryer module

    No / after model number on front of unit. Does that mean its a zero then?
    Trying to avoid deinstall as dishwasher next to it has a nice square cut in floor replaced with nearly matching laminate :rolls:

    Regards
    S.

    January 22, 2007 at 11:20 pm #201770
    eastlmark
    Moderator

    Re: Diplomat 8702 washer dryer module

    Simon46 wrote:No / after model number on front of unit. Does that mean its a zero then?

    Regards
    S.

    yes. usualy anyway!

    January 22, 2007 at 11:37 pm #201771
    Simon46
    Participant

    Re: Diplomat 8702 washer dryer module

    Ta Mark 😆

    S.

    January 25, 2007 at 10:11 pm #201772
    Simon46
    Participant

    Re: Diplomat 8702 washer dryer module

    Part number of module originally fitted is 546023701 DMPA H7.9 1200RPM.
    Ordered EMW and received DMPA 9 H7. Notice resistors are 5K6 on new module. Old faulty module has 6K2 resistors fitted. Is this wrong and going to fail?
    Also 2H10mins job took cause mate fitted kitchen with leaking and swivelly push fit plumbing with taps and waste miles away from collapsing water damaged cupboard and 2 inch thick floor up to machine :rolls:

    Regards
    Simon

    January 25, 2007 at 11:18 pm #201773
    eastlmark
    Moderator

    Re: Diplomat 8702 washer dryer module

    Simon, i have used 5k6 resistors on these for many years with no repeat failures even. 6k2 is a non standard reisitance and are very difficult to source without having them specialy made. Should cause no probs mate.

    January 25, 2007 at 11:19 pm #201774
    Simon46
    Participant

    Re: Diplomat 8702 washer dryer module

    sigh of relief 🙂

    thanks mark.

    S.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.