Hotpoint WMA44 Problem

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMA44 Problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 5, 2007 at 8:21 pm #24789
    Fairdeal
    Participant

    Hi Guys

    Have the above model machine.The washing machine works fine on all the programmes apart from the main cotton ones.

    The machine washed, heated up the water.I could not wait that long so went out and when I came back, there was no water in it and the Wash, Rinse and the spin lights were on constant.

    It happened two times, ran the Test sequence and Motor Triac Short circuit comes up.

    Machine spins fine.

    Any clues?

    Regards

    February 5, 2007 at 10:37 pm #203326
    HotDog
    Participant

    Re: Hotpoint WMA44 Problem

    Critical error has occured motor /motor harness probable cause

    February 15, 2007 at 8:40 am #203327
    Fairdeal
    Participant

    Re: Hotpoint WMA44 Problem

    Well changed the motor, same problem. Changed the harness and temporarly connected to the motor, test the washer 4 times and it was ok.

    s soon as I opened the machine and put the harness in,thought test it again and the same problem i.e. the wash,rinse and spin lights constantly on.

    Any ideas?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.