replacing door hinge on servis m6513s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › replacing door hinge on servis m6513s

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 7, 2007 at 10:50 am #24846
    bazza500
    Participant

    Has anyone had to do this?

    The door hinge is rivetted on to the front panel with a wierd looking rivet part no.438003300.

    Does anyone have a part no. for the tool to do this?

    The machine is only 6 months old so i dont think the customer would be happy with a nut and bolt job.

    February 7, 2007 at 11:21 am #203520
    A1TEC
    Participant

    Re: replacing door hinge on servis m6513s

    Hi,can’t see rivet on connect web site but a rivet is a rivet I recon any pop rivet of the same diameter should hold the hinge/door.

    February 9, 2007 at 8:10 am #203521
    rocker
    Participant

    Re: replacing door hinge on servis m6513s

    I did a hoover recently and came with rivets,( but not sure about servis) you only need a drill and rivet gun,takes 10 mins.(rivets cheap to buy)
    Cheers John

    February 9, 2007 at 9:18 am #203522
    bazza500
    Participant

    Re: replacing door hinge on servis m6513s

    thanks for the replies but if i thought i could get away with normal rivets I would have it done by now.

    The rivets in question are countersunk perfectly into the front panel so as everything is nice and flush when its done.

    If anyone has the part no. for the tool to do this I`d be grateful.

    February 9, 2007 at 4:21 pm #203523
    robbra
    Participant

    Re: replacing door hinge on servis m6513s

    If GB Dars don’t supply the parts it’s a cabinet fault and BER but in all the years working on SUK machines I’ve never had a hinge come loose.
    Rob

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.